EMS Module TL-6780 is a multifunctional engine monitoring system integrating all primary engine information (i.e. Tachometer, Manifold Pressure Indicator, EGT, CHT, Oil and Water Temperature Indicator, Fuel Quantity, Fuel Pressure and Fuel Flow Indicator, Voltmeter, Ammeter, Timer, IAT, OAT etc.). The EMS Integra also integrates propeller control for Constant Speed and Choke Control. EMS Integra is designed for use with all engine produced worldwide. The measured parameters are provided on CAN BUS (CAN Aerospace protocol). Proven, state of the art technology and components will provide you high reliability and accuracy of the measured information.

Price: On Request

	Multifunctional Display Integra with 7" display
	Multifunctional Display Integra with 9" display

- Engine Monitoring System, all in one to save money, weight and size
- All primary engine instruments (i.e. Tachometer, Manifold Pressure Indicator, Exhaust Gas Temperature, Cylinder Head Temperature, Oil and Water Temperature, Fuel Quantity, Fuel, Pressure and Fuel Flow, Voltmeters&Ammeters up to three measured places etc.)

Basic functions:
- USB connector for Flash drive for download data, configuration etc
- Voice warning message into your headphones
- Firmware update simply by inserting a Flash drive
- Pre-setup of EMS Module according to the particular aircraft type saved in a Flash drive
- History of previous flights that can be simply stored in a Flash drive

Technical parameters:
- voltage: 10.0 to 32.0 Volts
- current consumption: 700 mA @ 14 Volts
- maximal voltage and current of signalization: 30 Volts, 1 Ampere
- measurement: +/-1%
- RS-232 for external units (GPS, SL-30, CO2 detector etc.)
- CAN BUS (CAN AEROSPACE protocol)
- ARINC429 proffesional Aircraft bus (optional)
- operating: -20°C to 70°C (-4°F to 158°F) temperature range
- relative humidity: 95% without condensation
- load: +/-20 g
- vibration: 1 to 200 Hz
- weight: 700 grams (1.543 lbs)
- dimensions: 183.4x141.4x50.4 mm (7.220x5.566x1.984 inch)

Accessories:

	6724-34 Activation key for Rotax 912iS injection engine
	6724-37 Activation key for MWFly injection engine
	6724-39 Activation key for PBS Turbo-Propeller engine TP-100
	6724-40 Activation key for PBS Turbo-Shaft engine TS-100
	6724-35 Activation key for Twin engine feature
	6724-01 Thermocouple probe for Exhaust temperature EGT (type K) M8x1 Screw Type
	6724-16 Thermocouple probe for Exhaust temperature EGT (type K) M8x1 Screw Type (Advanced)
	6724-30 Thermocouple probe for Exhaust temperature EGT (type K) Clamp Type, diameter max. 60mm
	6724-02H2 Thermocouple probe for Cylinder head CHT (type J) 12mm Ring Terminal
	6724-02H4 Thermocouple probe for Cylinder head CHT (type J) 14mm Ring Terminal
	6724-02H8 Thermocouple probe for Cylinder head CHT (type J) 18mm Ring Terminal
	6724-25 Thermocouple probe for Cylinder head CHT (type K) Adjustable Bayonet 3/8-24 UNF
	6724-03 Oil or Water temperature probe (0 to 110 °C / 0 to 230°F)
	6724-04 Oil or Water temperature probe (0 to 150 °C / 0 to 300°F)
	6724-14 Oil or Water temperature probe (0 to 150 °C / 0 to 300°F) - for Jabiru engine
	6724-15 Oil or Water temperature probe (-20 to 240 °C / -4 to 460°F)
	6724-13 Passive Oil pressure sensor (0 to 5 bar / 0 to 72 PSI, 1/8-27 NPT) - for Jabiru engine
	6724-05 Passive Oil pressure sensor (0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
	6724-06 Active Oil or Fuel pressure sensor (Honeywell P/N:MLH010BGB06E - 0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
	6724-29 Active Oil or Fuel pressure sensor (Honeywell P/N:MLH010BSCDJ1231 - Rotax: 956 413 - Two wire - 0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
	6724-36 Active Oil or Fuel pressure sensor (Keller P/N:PAA-21Y/81649.99 - Rotax: 456 180 - Two wire - 0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
	6724-26 Passive Fuel pressure sensor (0 to 2 bar / 0 to 30 PSI, 1/8-27 NPT)
	6724-27 Passive Fuel pressure sensor (0 to 5,5 bar / 0 to 80 PSI, 1/8-27 NPT)
	6724-33 Differential fuel pressure sensor (UMA: N1EU07D - 0 to 0.5 bar / 0 to 7 PSI, 1/8-27 NPT)
	6724-07 Metal high-quality flow sensor (Floscan P/N:201A-6 - 1 to 113 litres/hour / 0.3 to 30 GPH)
	6724-17 Metal high-quality flow sensor (Floscan P/N:201B-6 - 2 to 227 litres/hour / 0.6 to 60 GPH)
	6724-18 Metal high-quality flow sensor (Floscan P/N:201C-6 - 7 to 302 litres/hour / 2 to 80 GPH)
	6724-32 Metal flow sensor (Electronic International P/N:FT60 - 2 to 265 litres/hour / 0.6 to 70 GPH)
	6724-19 Passive resistive fuel level sender
	6724-20 Active capacity fuel level sender (Westach P/N:395-5SB-5, length 30,5cm / 12inch)
	6724-21 Active capacity fuel level sender (Westach P/N:395-5S-1B-5, length 61cm / 24inch)
	6724-24 Active Manifold pressure sensor (MAP)
	6724-08 Passive speed sensor (inductive sensor)
	6724-09 Active speed sensor (inductive sensor)
	6724-10 Active speed sensor for engines with Bendix magneto (Westach P/N:720-14RB)
	6724-11 Active speed sensor for engines with Slick magneto (Westach P/N:720-14R)
	6724-12 Active speed sensor for engines with mechanical tach drive (Westach P/N:303DH2T)
	6724-28 IAT/OAT/AUX temperature probe -30 to 70 °C / -22 to 158°F)
	6724-31 OAT temperature probe -30 to 70 °C / -22 to 158°F)
	6724-22 Current shunt sensor for measuring to 50 Amperes

Other Accessories:

	0024-20 Stainless steel nut with metric winding M8x1 for EGT probe
	0024-56 Copper washer for Exhaust temperature probe
	0024-59 T-Fitting for fuel pressure sensor
	0024-62 Fitting for fuel flow sensor